The mold will be heated, and the injection mold is heated to process the injection molding of the original material. The heat treatment of the mold itself is very critical. 1. How can H13 mold steel heat-treat to reach 58°C? Heating and quenching at 1050~1100 °C, oil quenching can meet the requireme... read more
Hot runners are an advanced technology in plastic injection molding, and their materials play a very good role in injection molding. The machine nozzle is held in the molten state to the cavity and is not ejected. constitution There are many hot runner manufacturers and product lines, but a typical ... read more
The main channels, runners and gates serve to transport the plastic melt from the nozzle of the injection molding machine to the various cavities. The pouring system condensate can be pulverized and reused. This is true, but despite this, the presence of the condensate means that the productivity of... read more
Injection molding systems require the use of a gating system. What are the requirements for the gating system? When the injection mold is used, its polishing has two purposes. One is to increase the smoothness of the mold, so that the surface of the product can be smooth, beautiful and beautiful. Th... read more
There are many factors affecting the cooling of injection molds, such as the shape of the plastic part and the design of the parting surface, the type of cooling medium, temperature, flow rate, geometric parameters and spatial arrangement of the cooling pipe, mold material, melt temperature, and the... read more
