Thin-wall mouldings are an increasingly popular way of providing a flexible and lightweight injection solution to many manufacturing situations. THIN-WALL MOULD, or thermal insulation product, is produced through injection moulding and has been found to be an extremely cost effective solution for a ... read more
The application of thermal moulds is made possible by the presence of two heat-resistant plastic profiles that are inserted into the cavities created by the cold forming process. The profiles, thermoplastic polymers (TPU) polyimide, and polyurethane (PU) are pressed together at high pressure using a... read more
There are many methods used to make PET plastic bottles, but the most common method can be broken down into the following steps: Step 1: First heat the PET to melt it into a molten state, and then put it into a tubular mold. This process is called injection molding. Once the PET becomes the same sha... read more
Many molds, especially engineering thermoplastics, work at extremely high temperatures, such as 80 degrees Celsius or 176 degrees Fahrenheit. If the mold is not insulated, the heat loss of the air and the injection molding machine can easily be as much as the heat loss of the injection cylinder. The... read more
The ejector pin is used to eject the product so that it can be ejected from the mold cavity. Principle of ejection: ejection originates from the injection molding machine, the ejector plate pushes the ejector rod, and the ejector rod pushes the product out. However, (99)% of the ejector pins of the ... read more
