• Polishing and maintenance of injection molds-Diamond grinding and polishing

    Polishing and maintenance of injection molds-Diamond grinding and polishing

    Diamond grinding and polishing should pay attention to the following points (1) This polishing must be carried out under light pressure as much as possible, especially when polishing pre-hardened steel parts and polishing with fine abrasive paste. When polishing with #8000 abrasive paste, the common... read more

    May 16,2019 News
  • Tips for molten plastic seams

    Tips for molten plastic seams

    The molten plastic in the cavity meets in the form of multiple strands due to the intrusion of the insert holes, the inconsistent flow rate, and the region where the filling flow is interrupted, and a linear weld seam is produced because it cannot be completely fused. In addition, in the case of gat... read more

    May 25,2019 News
  • What are the mold design steps?

    What are the mold design steps?

    Mold design refers to the digital design of the enterprise mold. A mold is an industrial product that shapes a material in a certain manner in a specific structure. So what are the mold design steps? First, to carry out product feasibility analysis, to independently analyze the product drawings, it ... read more

    May 30,2019 News
  • Mold processing flow and precautions

    Mold processing flow and precautions

    Process flow layout 1. Bottom processing, processing volume; 2. The benchmark of the casting blank is corrected, and the 2D and 3D surface balances are introspected; 3, 2D, 3D surface roughing, non-device non-task plane processing (including safe platform surface, buffer device surface, platen plane... read more

    Jun 15,2019 News
  • What are the general requirements for plastic mold manufacturing?

    What are the general requirements for plastic mold manufacturing?

    What are the general requirements for steel for plastic mold manufacturing? With regard to the requirements for the manufacture of plastic molds, today, Nodi will introduce to you here: When pressing plastics, it can be divided into two types of substrates, one is a thermosetting plastic and the oth... read more

    Jun 24,2019 News